Custom/Hybrid Bob Gen 2 an honest review

chadman154

chadman154

#Itsonlymoney !!!!!
Location
Dirty south
Tpain said:
Chad definitely has one of the nicest, cleanest looking hulls I've seen yet! His attention to detail is second to none.

Well cases were epoxied and left to cure last nite so hopefully today Zack and I will bring the 4 mil stroker to life tonite :) and hopefully I can get some video in the test pond of us flippin it! This thing should be a monster- 4 mil stroker crank, 61x jugs punched to 760 and ported to the hills by Zack at Powerhouse! Will come out to a 799cc all said and done........
Click to expand...


Whens it hitting the water?
 
S

sleddingfarmer

Location
Wisconsin
Good review, and helpful thread

I'm thinking about picking up a BOB shortly here, but I was told by the owner it doesn't have a VIN or hull number or anything? How does a guy go about registering one of these suckers in Wisconsin?
 
S

Schmidty721

someone turf my rails
Location
WI
Yeah, WI has to be one of the easiest state to register an AM hull in. Took me 15 min and was like $20 for three yr registration.
 
Tommygunz

Tommygunz

Team PHP
Location
Wisconsin
powerhouseperformance said:
awww, come on. tell everyone I did one on the first try...Which I was never able to do on my race gas 771 lol:)
Click to expand...

I said there was more to come;) I was to tired to type up the whole review.......mad props to Zack for landing the first 180 to flip he ever tried on this motor! And like he said that was comparing the fact that he couldn't do it on his Bob with his race gas dry piped total loss motor!

So the details on the motor Zack built me(and he one he flipped first:) ) are as follows: 61x cylinder with full mod porting from Zack, 62t cases full port and epoxied, 4 mil stroker crank from Zack(a Powerhouse specialty available to anyone through Zack), stock electronics with msd enhancer, lightened flywheel and bpipe. And this initial test was done with pump gas domes- only 180 compression!!! New test domes will be cut next week to get about 230 to push this motor to the Max!

Again I can't thank Powerhouse Performance (Zack) enough! I hope someone gets some video soon to post it up on here!
 
Last edited:
Tommygunz

Tommygunz

Team PHP
Location
Wisconsin
Well I got another night of test riding in last nite and finally got a full flatwater flip on my ski..... just as Zack put the camera away......oh well we will post some video soon I hope.
 
Tommygunz

Tommygunz

Team PHP
Location
Wisconsin
Finally got a pic of me flatwater flippin my surf hull in my pond. There's some proof lol
IMG-20120520-00178.jpg/

Sorry for it being upside-down. My buddy took it with his phone and I can't resave it rotated. Tried a ton of times
 
Last edited:
You must log in or register to reply here.
Top Bottom