Super Jet Buy new stator or send bad unit to JSS

better put that thing in a run it for a couple months before you give a solid recommendation...initial quality with ski parts is even less interesting than cars
 

Magyar68

Really!!!
Location
Lewisville
Jumping in on this cus I just can't take it any more. So same story here. It appears that the Base plate is for a t62 but the Charge coils and Lighting coils are for 61x, or 64&61x. so only the Pulse coil, base plate, and the connectors are correct but I could be wrong. the inner distance of the Lighting Coils is 2 MM smaller, and the Charge coil is Wired in the middle, and grounded in the middle. the reseller is putting pressure on WSM, we'll see how it goes.
Readings from the WSM:
Pulse W/R -B 16.1 Ground Wire 16.3
Charge B/W -B 514
Lighting G - G 1.6
Black male Connector to Black Ring Connector .9
Brown from Connecter to Solder point on Coil .8


Anyone tried the SBT line of replacements?
 

Attachments

  • IMG_0366.JPG
    IMG_0366.JPG
    129.7 KB · Views: 26
Last edited:

Magyar68

Really!!!
Location
Lewisville
Also with mine I noticed later that it is marked with 004-240 6R8-85560-00-00. The 004-240 is supposed to be 6R8-85560-10-00 replacement.. and now it would appear they have Pulled the images and listings for Yamaha stators from their Website..
 

Attachments

  • IMG_0368.JPG
    IMG_0368.JPG
    137 KB · Views: 19
Last edited:
Top Bottom