C.A.T.S. - Cheap Arse Trim System - post yours!

[SUPERJET-113]

In the past many times I used a chrome plated toilet supply line for the cable to run through. Then like said above buy a long drill bit at homedepot, but you do not need the 3' bit that costs $40 or whatever. The length you need to drill through the bulkhead to the pump cavity is 17 3/4". Homedepot sells a 18" for around $20 and its just enough to do the job. Then 3m 5200 the tube to the hull.

 

[txsuperjetfreak96]

What's everyone using for cable holder at reduction nozzle

Sent from my SAMSUNG-SM-G900A using Tapatalk

 

[Roseand]

Depends what cable you use.. I'm using a bike brake style cable for mine, and I'm using a cable gripper in the engine bay and then for added grip, I'm gonna make a bracket to lightly clamp the end of the cable housing between the top of the reduction nozzle.
Bike style cables are an awesome way to go... Super cheap and easy to make.

 

[txsuperjetfreak96]

Yeah thought about going to local bike shop c if I can find long enough cable

Sent from my SAMSUNG-SM-G900A using Tapatalk

 

[Roseand]

Make your own. Very easy to make..

 

[miah]

 

[miah]

 

[miah]

 

[miah]

Just a few pics of the CATS system I'm doing. $35 for tandom bike cable,brake lever then I made a bracket out of a 650sx carb bracket and a few other odds and ends around the garage

 

[nicolas30350]

How do you guys back the nozzle? I would like to back it up 2cm.
I was thinking drill and tap the reducteur, put a much bigger bolt. use jb weld on the tread and around it. Drill/tap the bolt to put my oem bolt in it.