Carb Settings for SJ Dry Pipe (Type 4)

stredman

stredman

stredman
Location
Fargo, ND, then Chicago, now Louisiana...
For those of you who have dry pipes (Riva freeride of Factory Type 4) on single carbs, what are your carb settings that work best? I just got a type 4 and want to get the carb set up and tuned properly. The only info I've been able to find is the jetting done on a single carb blaster with a dry pipe.
 
DaUpJetSkier

DaUpJetSkier

I like square
Location
Marquette, MI
I had the same problem, look at some of my old threads, I was doing that about this time last year. I honestly cant say what Im running in this carb I change some things and forgot to write it down. It may be written in one of my old posts about this exact subject.
 
STEELDOGG

STEELDOGG

Hi Ho Silver!
Location
Birmingham, AL
The square nose that Quick Mick got from us had a single BlackJack 46 and a type 4 pipe. i know this sounds weird, but I think it was jatted 135/135 or 130/130 something like that.................Uhhhhhhhhhhh.....Mick?
 
Mouthfulloflake

Mouthfulloflake

ISJWTA member #2
Location
NW Arkansas
this is from the factory pipe instructions for the BLASTER single carb drypipe...

1993-95 single carb
Main jet: 150
Pilot Jet: 125
High speed screw: 1 turn out from closed
Low speed screw: 1-5/8 turns out from closed
Needle & Seat: Stock
Spring: 95
Comments: Stock engine with flame arrestors
 
You must log in or register to reply here.
Top Bottom