Octane carburetor and pipe adjustment

O

octane83

Location
mooresville nc
I just bought a 02 octane and it had some bad gas in it. I have pulled all the old gas out and will be putting fresh in. I need to adjust the carb and the pipe. What are the best settings. Im just looking to ride right now not really free style or race. Thanks for the info and help.
 
Billybo455

Billybo455

Location
Central FL
well there's only a low speed adjustment on the carbs. prolly a turn and a 1/4 out. i ran my pipe with the top two screws closed and the bottom one 3/4 open.
 
S

superjet119

Location
Mineral Va
If I remember correctly with the stock jets the carbs will be turned out about 2 to 2.5 turns. I will have to check the pipe setting on the 4 we have, but they are all different. I would recommend the rejet kit, but I stuck with the stock hi speed jet and the low speed jet of the jet kit with stock spring.
 
Billybo455

Billybo455

Location
Central FL
run it like that, but start working the 3rd screw in. i ran it at half a turn out and it didn't sizzle, but it was hot. that was the best bottom end. be careful :)
 
You must log in or register to reply here.
Top Bottom