Chan hull ride plate questions.

d_moss · Jun 16, 2017

How do I get this to spin better. Off a wake best I can ever do is a 270.. I have an original thrust trim that prob Hurts me a bit. Pro tec long nozzle, and a plate that is flush at the chines and bumps out 3 inches under the pump.

What are the fidgety spinners running ?

Sent from my SAMSUNG-SM-G890A using Tapatalk

bkillgore · Jun 17, 2017

I would chop that nozzle and get a x metal trim

Sent from my iPhone using Tapatalk

zzylstra · Jun 17, 2017

Its the chan hull, way glued to the water. Trust me I had one

bach6177 · Jun 17, 2017

Chans are hard to do spins. Pretty aggressive chines

Sent from my iPhone using Tapatalk

d_moss · Jun 17, 2017

Nothing a grinder can't fix

Sent from my SAMSUNG-SM-G890A using Tapatalk

SmittySX · Jun 17, 2017

Get a shorter nozzle for starters. When going for a 360 instead of doing a flat spin try and burry the nose when leaving your wake. That will give you a little more off axis roll than a flat spin but you'll pull more than 270*

d_moss · Jun 17, 2017

Awesome thanks for the advice. A 155 pump should be showing up soon with a different trim setup hope that helps

Sent from my SAMSUNG-SM-G890A using Tapatalk

B_RAD_BALLA · Jul 27, 2017

This helped my spins a lot with better directed thrust. http://www.x-h2o.com/index.php?threads/simple-fix-for-old-style-thrust-trim-flowguard.184206/

I still have to lean them over when on my own wake. off a boat or roller I can do them flat. I have the stock chan ride plate I think it sicks a couple inches past the bottom of the hull.