Cooling line psi on sj

[K-SCARB]

Does anyone know what psi the cooling line puts out on a sj?

 

[FLY6584]

Dual Cooling or Single?

Not that I would know the exact answer to each, but I do know that it isn't that high.

 

[K-SCARB]

I need to know per line coming out of the pump. Should be the same if you have one or two I think.

 

[FLY6584]

edit: nevermind I see what you're asking for now. Not sure what the pressure is though.

 

[GDFL]

I was told that it's about 25psi at WOT

 

[K-SCARB]

I was told that it's about 25psi at WOT

Do you know where I can find this out for sure. I have looked in the service manual and other dealer information and can't find anything.

Need to know for the dyno that we are setting up

 

[duckman1]

It's going to be different on every machine. Variables such as hp, impeller size, rpm, wear ring condition, all make a difference.

 

[GDFL]

Do you know where I can find this out for sure. I have looked in the service manual and other dealer information and can't find anything.

Need to know for the dyno that we are setting up

That's what Paul told me when I was discussing a possible pimpin project with him and I needed to know the pressure.

 

[SuperJETT]

It's going to be different on every machine. Variables such as hp, impeller size, rpm, wear ring condition, all make a difference.

Bingo. Also, the number/size of bypass fittings, etc etc.

 

[gj_fx1]

I'd say you'll get close enough if you adjust the pressure so that the flow out the pissers "looks" right.

 

[K-SCARB]

Thanks for the info guys