- Location
- Tualatin, OR
I am swapping SXRcarbs onto my SXI and realize that I cannot a place to hook up the factory oil injection. Did the SXRs come from the factory as premix only or am I missing something? Thanks.
SXR Do SXR Carbs have factory oil injecting?
- Thread starter clayne100
- Start date
- Location
- Colorado
No they don't
Pre-mix only. Thank god.
- Location
- Kent Island, Maryland
doesn't the oil line hook onto the intake manifold and not the carb?
Vumad
Super Hero, with a cape!
- Location
- St. Pete, FL
Oil injection is controlled by the pump on the front of the motor, that being said you can hook the lines up anywhere. One place being the primer location if the choke plates have been removed.
At least I think it will work like that. My gp1200 injected oil from the velocity stacks until I blocked it off.
As a final note, just run premix.
At least I think it will work like that. My gp1200 injected oil from the velocity stacks until I blocked it off.
As a final note, just run premix.
- Location
- Tualatin, OR
Yup. Going premix. Just need the block off plate on Monday.
Good thing.... I've never seen a non-premix sxr...