Dual Pulse 44s on Single Pulse Cases

[x2skier]

Any problems with tieing both pulse lines together on dual OEM 44s and teeing it off to the single 62T case pulse?

 

[demolition_x]

Dual pulses are going to deliver better signal to the carbs. Its not very hard to do. I drilled mine out while the motor was in the ski and it wasn't bad. just stuff some paper towels in the intake tract past the pulse and drill away. Use a shop vac and vacuum up the chips, countersink the hole a bit and glue and press the nipple in place.

 

[Watcon]

Dual pulse fitting kit

Here's a simple solution. The dual fitting is much better than tee'ing off the single pulse line..http://www.watcon.com/Catalog_Pages/Dual_Pulse_Fitting.htm

Thanks for looking!