easy composites 3d printed mold tutorial

[Vumad]

I have spoke about this a lot and I believe some others have too. Well Easy Composites made a really good video explaining the process.

So you can either 3d print a plug, and work it to lift a production mold. Or in the case of this video, you can 3d print a mold to use just once or twice and then toss. This would greatly reduce the effort and expense of one offs and prototyping.

 

[TxSurf121]

I plan on running mine with some 3d printed parts

 

[beerdart]

I print lots of ski parts and molds for urethane. I have FDM and Resin printers

 

[Vumad]

I print lots of ski parts and molds for urethane. I have FDM and Resin printers View attachment 408519View attachment 408520View attachment 408521View attachment 408522View attachment 408523View attachment 408524

Can you post information about the urathane molds, the process and the best application for the parts.

 

[beerdart]

Can you post information about the urathane molds, the process and the best application for the parts.

Most of the more complex molds ive made are from silicone but 3D printed molds are an option.

 

[waxhead]

We 3d printed the mold for our ride plate for the 550

 

[JetManiac]

We 3d printed the mold for our ride plate for the 550

What material is the printed mold?

 

[waxhead]

What material is the printed mold?

I used pla,