Super Jet Engine Keeps Failing Pressure Test.

[High Speed Industries]

This engine won't pass a pressure test. I think it's from a pinhole in the case somewhere. . .

 

[Big Kahuna]

Retorque the head, may have caused a small leak in the side of the cases. Just give it about 60 ft/lbs.

 

[High Speed Industries]

Retorque the head, may have caused a small leak in the side of the cases. Just give it about 60 ft/lbs.

Thanks! I'll give it a try.

I've also heard some good things about flex seal.

 

[Big Kahuna]

Thanks! I'll give it a try.

I've also heard some good things about flex seal.

Get the kind in the tube, the stuff in the spray can does not cover well.

 

[Vortex]

Newspaper and Bondo. What problem?

 

[DAG]

Knock a hole in other jug and toss it up on Craigslist

"Motor spins with ease,, great even compression. Spark fires first and every time, This thing blows everything else away, easy back flipped last time i rode it".

 

[restosud]

but you will have to put a new rod bearing !

 

[mikidymac]

Pretty sure it just needs a new battery and fresh gas. Ran great last time you had it out I assume?

 

[High Speed Industries]

Customer said it ran great all day. Had a big flat landing on and under flip. Said the engine turned off upon landing.
Should be a simple carb adjustment and he will be back on the water.

 

[96superjet]

I’m interested in what the backend of the starter looks like


Sent from my iPhone using Tapatalk

 

[High Speed Industries]

I’m interested in what the backend of the starter looks like


Sent from my iPhone using Tapatalk

Surprisingly it's untouched.

 

[Christian_83]

Knock knock..
Whoes there?
Cylinder 2.
Damn, hydrolock or wear?

 

[Christian_83]

Pretty bad it took out your starter too :/ did it also hit exhaust manifold?

Look at this conrod from my buddys DASA 1000CC

 

[Mike W]

Damn!

 

[High Speed Industries]

Turns out the cases were an easy fix. All it took was money.

Now the big question. Will this be built and tuned before I leave for finals?

 

[restosud]

yeah but they already have stress cracks everywhere! look at them jeebus

 

[Prairidawg]

JB Weld for the sides and a press for the connecting rod?

Sent from my SM-G950W using Tapatalk