Super Jet Factory b pipe install

[Marty]

I have just installed my new b pipe and I'm having some problems getting the hood back on because the tube on the hood. Can i just run without the tube? or cut it?

 

[ProSouth]

just trim it until its not touching after you install it. or remove it depending on the hood/how many other tubes there are. my blowsion had 3 tubes. i just trimmed the one on the pipe side

 

[Vumad]

Try not to remove the tubes if you don't have too. The help keep the water directing towards the bottom of the hull and away from your intake. This is even more important if you removed the stock waterbox. If you have the ski on it's right side, or are making a hard left with water in the hood, you could be dumping water right into you carbs.

 

[Marty]

Okay! I will just trim it a bit.

 

[h2odesperado]

can't you just rotate it to clear the pipe? no cutting needed

 

[djraider700]

Loosen it up and rotate it.