- Location
- Northwest, CT
Well it took all summer ..... But finally got it done. Lemme know what you think . Its different direction from most q8's .
Finally some graphics for the q8
- Thread starter sicksxr07
- Start date
- Location
- CT
Looks good man!!!!!!!
- Location
- Northwest, CT
Lol you would think that. Just happen to have it off adjusting my steering
- Location
- The Windy City
Sweet
Bobert540
Site Supporter
- Location
- Rockford,MI
What motor are you running in this? You were going off on Sunday at Wavedaze!! Best Q8 I have seen yet!
N3vrSat1sfied
Military Member
- Location
- Fort Worth, TX
agreed! what length pole is that?
Last edited:
DirtyJ
Freedom aint free no more
- Location
- Alliston, Ontario, Canada
Saw this boat at Wavedaze, looks straight PIMP!
- Location
- CT
Keith had this thing flipping like crazy Sunday.
I'll let him tell the specs on the motor. But you guys will be shocked.
I'll let him tell the specs on the motor. But you guys will be shocked.
- Location
- Northwest, CT
sxr800 based
85.4mm pistons ( 849cc)
180psi stock milled head
novi 48's
r&d intake
v force 3 reeds
fully ported motor by art at jetworks performance
matched and bored factory b pipe with sxr wetpipe chamber
atp waterbox
tbm total loss flywheel
advent t3 ignition with some pretty basic no crazy timing curves by art also
jss coil with msd boots
all coupled together with some ADA billet couplers drilled out
sending to a 145 setback 12v mag with a 11/18 thin blade
skat trim with 86/89 mm nozzels
all in all not a crazy motor.. but she makes power
and thanks. i take pride in building a clean, reliable and sweet looking ski.....
Last edited:
- Location
- Northwest, CT
started life as a -2 but was chop -4 so its currently -6 with -3.5 turnplate
- Location
- york,pa.
I saw this ski in person.This thing is sick! I thougth mt stuff was clean.This was an all around bad aaaaas ski.The rider road the shiiiiiiit out of it,great flips ect.All this with kawasaki power.Dasa 1000?????
- Location
- Pennellville, NY
Hey I was very inpressed with this motor. Keith let me try it out at WaveDaze and incouraged me to flip it if I was in deep water. I said no no thats ok....So I rolled it a couple of time and thought MAN this thing runs good!!!! So I went deeper and the wind was blowing pretty good on Sat. So I rolled up to a pretty good size swell and let her have it and before I knew it, I made it all the way around and was riding away. Made my first completed backflip!!!! I tried 4 more and just keeped nosing in! The nice thing was the ski never stalled. Just rolled it over and rode away!
Thanks Keith! And good job on the build!!!!
Moto360
Thanks Keith! And good job on the build!!!!
Moto360
- Location
- CT
BruceSki
Formerly Motoman25
- Location
- Long Island
that ski was up in orbit all weekend. cool boat.
WILKEY
SO FAR CHANGE SUCKS!!!!!!
One of the cleanest skis ever. Good job man u were ripping that thing!!!!
- Location
- Pennellville, NY
This is mxsuperfly124 in these pics during the sickest trick contest.