- Location
- Central Pa
Flush kit. Where does this go
- Thread starter cspaid
- Start date
- Location
- Milton, Florida
That is called a "backflush kit". You stick the silver end into the pisser where water comes out when you ride.
- Location
- Central Pa
. As in for the cooling pisser?
- Location
- Central Pa
Damn I thought so. It doesn’t fit
- Location
- Central Pa
Isn’t there a place in the rear to pump in water?
I have a different model but the silver tip looks like that one. I had to sand the diam of that tip down so it would fit into the pisser of an after market pisser..
- Location
- Central Pa
Ok I will grind it down. I guess I thought there was a place in the rear that sucks water in.
Your sorta correct, water is pushed into a hose at the pump stator section, but you'd be disconnecting it every time to flush with that one. Flush kits unusually have a T for a tip, so you can splice it inline with a engine cooling hose at the engine and leave it. I guess you could install a Y in an engine cooling like and then attach what you bought to a small piece of hose to the Y, but that not normal.
How many pissers does your ski have and are they after market ?
- Location
- Central Pa
Just one because it’s stock. The pisser is really small. I’m going out on the ocean today for the first time and want to flush after.
Oh ok, Iam not sure the size of an OE pisser ID, with after market pissers sanding works. You'll have to check fittment, I guess if it's s no go, could the hose be removed from the pisser or the other end and that sleeve slide inside and clamped after you ride so you can at least flush today ?
- Location
- Central Pa
I’m going try and grind it down today and see if that works. I’m on my way home now from the beach.
- Location
- Central Pa
Yes. I do know that. But thank you for making sure. I maybe able to take hose off the pisser on the inside to back flush until I work it out.
- Location
- Central Pa
I was able to just pop the hose off the cooling pisser and back flush it. I can’t believe how simple it was. Thanks for all the help. I just anyways have to learn the hard way so I was hesitant.