Footrocket questions?

[rickybobby]

I need pic of footrocket trays, or how to cut the holds and turfed them. And how there adjusted?

Was looking for pics of short tail plate or measurements, my footrocket came with long plate and I mostly ride flat and boat wakes. Thanks for any help.

 

[speedysprocket]

Foot hold placement is up to you- move them and see what you like.
For turf, I like wrapping it around all the edges. I think I'm the only one who does that though. I've seen others wrap it around where you foot goes in, but not the bottom edge and front.
My hull came with two plates. I cut two inches off one for the surf, left the second untouched, and made a third to cut even with the transom for flat water.

 

[rickybobby]

U cut 2 inches from long ride plate.

 

[hink320]

I ride strictly flat and I cut my plate flush with the hull. You could just start out with it long and cut it down as you get comfortable on it, that's what I did.

 

[speedysprocket]

Just cut one or two inches off at a time as you get comfortable.

 

[rickybobby]

Im gonna cut 2 inches off. And go from there. Thanks for the help.

 

[nutz]

I cut mine flush with the back of the hull. You may wanna try removing the tubbies as well if your just using it on the flat, you can turn it on a dime!