Fouling rear plug**updated**

Mike W

Infidel
Location
North Florida
Tested coil

-Primary coil (orange and black wire) resistance is 0.2 Ohms. According to the shop manual within spec is 0.078-0.106 Ohms
-Secondary (coil wires) resistance is 4.265
 
Last edited:

Mike W

Infidel
Location
North Florida
I pressure tested my engine I found air leaks coming out the reed block screw holes of my ATP manifold. I'm running VF3 reeds so those holes are not used. Anyway looking back it should of been common sense to seal up those holes but the gasket looked like it sealed that area up well enough. Hopefully sealing those holes up cured my problem.
 
Top Bottom