Freestyle SXR Build!

[Scorn800]

I have a 3DR hood. The full carbon. It's about 1/3 the weight of stock. It does not have tubes on the inside but is designed not to take on water. There are no front air intake holes. I've ridden in the surf many times and not had a problem with water intake.
As for reinforcing a SXR. I really don't think it needs it.
Good luck on the project DJ

 

[Antonio Paulinelli]

Ummm...0degree would be freestyle bars if im not mistaken. I could be wrong but most freestylers use 0 or flat bars.

Also check in with XMW for pole and steering product

sure!if i were ya i wouldn't get the 4 degree...

 

[Takeastand SJ]

I prefer a 4 degree as a lot of other surf riders, it is mostly what fits you right. I don't think strait bars would give you any advantage?

 

[MADMAT]

This is DJ. I buried that sucker from about 16ft up right into the sand nose first. Fliped over the bars and lost the bumper, but not even a slight crack in the hood.

Ski4: Yeah, I got a couple stress cracks around the pole bracket... I'll beef em up.

 

[djkorn1]

Here are some updated pics of the Build-Off Kawi...

 

[djkorn1]

A Few More... I was thirsty!

 

[djkorn1]

And a few more... It looks pretty, doesn't it?:headbang:

 

[djkorn1]

The pump shoe is busted up pretty good. It must be from all those Sea-Doo riders I ran over. :sneaky: No cracks in the hull anywhere except in the gel coat from rippin rivets out and a couple tiny ones in the gel coat by the pole bracket. This area is about 3 times as thick as a stock SJ. :hail: I will grind em all and West Systems em up... Almost all the gel coat is gone from the bottom of the hull. It is down to the glass (which is still super thick):fing02:

 

[MADMAT]

Great pics DJ. I can't wait to see that sucka!!:Eyecrazy:

 

[michael950]

Yeah, just hope you can get 'er done before lanier.

 

[T-bone]

parts scatered all over the place and 15 empty beers, oh yea thats going back toghether right:biggrin: right when you think your done..............hey what are these for ?.........................must be aftermarket stuff..........lets go riding:headbang:

 

[Ross_C]

Love the beer cans in the hull!

That is gonna be great when it is done!

 

[douglee25]

Man that is some $hitty beer bro!

Doug

 

[djkorn1]

Its my garage beer. Guiness just doen't go with Jet Ski buildin'
:friday:

 

[waterfreak]

to build an award winning boat, you need CL's!!!!!!! (Coor's light)

Step up!!

 

[sflsurfrider]

to build an award winning boat, you need CL's!!!!!!! (Coor's light)

Step up!!

f**king alky

 

[douglee25]

What you need are some micro brew beers with actual taste. Not those mass produced beers on the market. Puke.

Doug

 

[unclehulka13]

Labatt Blue is the builders beer of choice.

 

[Freestyleriverrat]

Samual Jackson malt liquor......gets ya drunk biotch!!! :woot:

 

[djkorn1]

Guiness and Boddingtons and Great Lakes Beers when I'm chillin...

But buildin' skis requires cheap ghetto beer like PBR and Busch Light. The Buds are my brother's.