gCASEy's 2007 SX-R Build

G

gCASEy200

New 2007 SX-R
Right now the boat is completely stripped minus the electronics.
-Getting the footwells reinforced with enclosures (Revs)
-Took off the stock graphics, and getting everything re-sanded and painting the entire up deck a glossy red, keeping the bottom black
-Skattrak drop kit, with a 80mm Nozzle
-TBM Baffled Waterbox with the rear exhaust
-RRP Pole with Carbon Fiber Turfed chinpad
-UMI 0 Degree Bars, with turn plate (installing xmetal)
-XMetal Throttle
-Wet Pipe With mod chamber
-ODI Ruffian Grips
-Blowsion Black Outlets
-Dual Cooling
-MSD Quick Connect
-R&D -1" Turn Plate
-UMI Trim Lever
Cutting out all the extra glue/sanding the inside down
-Jenetics Recharging flywheel
-Purchasing Advent 3 with remote switch(pending mx595 sells it to me)
-R&D Head with 27cc permanet domes
-Zforce freestyle porting, along with a 42mm true bore on my stock carbs
-Sato Speed Pump Cone kit 2 Cones
-Blowsion Rail Caps- Being Fiber glassed in, with a permanent fit
-Repitched and setback stock prop
-TBM Ride Plate, and Intake Grate
-Blowsion Dual Fuel Pick Ups
-Dual 500 Bilges with remote switches
-Returfing the rails (Anyone know where i can buy a kit?)


-Want a lightweight hood prefer carbom (if anyone has one for sale for a decent price)
Might be buying an xmetal pole kit also- see which one i like more
Should i paint the nose piece black to match either pole? Or a red to match the rest? What about the rail caps?
Pictures with ski tripped--
The ski is being reinforced/sanded/painted as we speak
This is my first build, still in the learning process about everything
Cyclinder/Carbs, and manifolds are being sent out tomorrow
 

Attachments

  • hull1.jpg
    hull1.jpg
    68 KB · Views: 82
  • hull2.jpg
    hull2.jpg
    80.7 KB · Views: 64
  • hull3.jpg
    hull3.jpg
    55.8 KB · Views: 74
  • carbs pre bore.jpg
    carbs pre bore.jpg
    86 KB · Views: 63
Last edited:
Proformance1

Proformance1

Liquid Insanity
Site Supporter
Vendor Account
Location
New York Crew
I would not do the caps again, not worth the effort, unless you just like the look. If I had it to do over I would just turf them!
 
G

gCASEy200

wnb800 said:
dont get revs for an SXR, you have to cut the right toe out because of the exhaust
Click to expand...
I had already put them in, and cut into the pipe, i just put alittle slice in it and threw some jb weld on it.
As for the blowsion rail caps, when i tripped the stock turf off, i stripped the stock rail caps off and just ripped them off, therefore i need to get it re-fiberglassed, and ran across a good buy on the blowsion caps, i think i paid 100 shipped for them, they fit like complete ********, but im going to fiberglass them in, and paint the lines.
As for the enclosures, i road without them last year, but decided i would just put them in because i have them.
Does anyone know where i can buy turf for the rails? I want to turf the rails, but i want to buy a kit, like they have for the superjet, the pre cut.
I would turf them but i havent mastered the turfing yet.
 
Proformance1

Proformance1

Liquid Insanity
Site Supporter
Vendor Account
Location
New York Crew
Blowsion has a kit, but beware, you still really need to cut it. It is just a basic design and you end up cutting at least an inch all around, and in some places more. Only the dash is cut to size.
 
G

gCASEy200

Proformance1 said:
Blowsion has a kit, but beware, you still really need to cut it. It is just a basic design and you end up cutting at least an inch all around, and in some places more. Only the dash is cut to size.
Click to expand...
can you send me a link, i couldnt find anything on there size, and when you turf you heat it up and throw some weld wood on. Sand down where you put the glue?
 
G

gCASEy200

24-7 760 superjet said:
Nice talking to u today.Hope i shed some light on ur future decisions.This build will take a turn to the next level..promise:cool2:
Click to expand...

I know, you talked some sense into me. I'm hoping to get down rather this weekend or next wensday, to drop this off, and take a look at your rediculous build. Sorry to hold you up on the phone tonight. I can't wait.
thanks again man you are a great guy, and know your ********, ill give you a call tomorrow
 
You must log in or register to reply here.
Top Bottom