Goped

[BATMAN]

Hey,

when I can`t go to,the water, I`m always using a Goped GSR 25 to ride with my friends...

Now I wanna make it faster, stronger and better looking...

Somebody here who knows how or knows where I can get parts from ???

In Germany it`s forbidden to use Gopeds on the streets and so we don`t have stores with goped parts...

I have to buy in USA.

But where and what ??


Please help.

 

[DR3]

factory pipe has a pipe for it
http://www.factorypipe.com/

and this place used to deal with a lot of go ped stuff but just doesnt advertise it on the website... email them, they had everything
www.cyclespringsmotorsports.com/

 

[BATMAN]

THX

I´ve emailed them. Maybe they can help me out...

 

[Brenden]

i have a friend who redid his whole ped
new type rrp type bars that look like a chopper (not by rrp)
ported motor by a good ped specialist
pipe'd has a new head as well
ill try and get more specific stuff for ya
i know there was a forum site for them
good luck making it rip

 

[BATMAN]

Hey,
can you get some pics ???

 

[Speedfreak]

talking about gopeds did you see the goped vs the camaro race. It is pretty good I don't believe it but here is the movie

http://www.youtube.com/watch?v=http://www.youtube.com/watch?v=dag8EVyqW34

 

[DannyF]

my buddy has a brand new pipe he wants to sell i believe its a westcoast or engine trix ill ask if you want

 

[pimpchevy07]

getaped.com has all kinds of stuff

 

[vomitspot]

ada racing has tons of bling/perf parts

 

[jetx]

check out gopednation.com for all sorts of ideas...

 

[Jumper]

http://www.gomeyer.com/retail/index.php

Robbie Meyer was a Go-Ped racer and Jet Ski racer back in the day. He used to write a column for Splash magazine.

 

[ski4]

i got a lot of my parts form ebay
you can get carbs, timing advances, decks, pipes wheels anything really
the only thing i think i got from a shop was the pipe

 

[BATMAN]

Hey,

I`ve emailed the guys, but still no replys... I think they don`t like germans ;-)
The problrm is when I buy all the suff @ ebay, that I have to pay customs and freight to Germany about 10 times.
And I don`t know which high volume pipe fits my GSR 25 Goped...
Cause there are various Gopeds with different engines and I don`t know what to buy...

I need help as soon as possible !!!!!!!!!!!!!!!!!

 

[Waste Land]

http://www.davesmotors.com/store/partsbyfunction.html

Discount codes - DDM = 5% off anything
ECDDM=10% off anything

I'm running a sport with a 2mm stuffed stroker, bigbore cylinder, 663 carb, velocity stack, and a 710 spindle with 3rd bearing

 

[BATMAN]

Hey,

sounds good, what you have... how ast is it ?

I´ve emailed davesmotors.com I hope they can help me out. The others don`t like Germans or don`t have stuff for GSR 25

I hope that I can close this X-file soon and work on my next...

Superjet 860 ccm

But thank you all for ya replys

B A T M A N

 

[Waste Land]

Hey,

sounds good, what you have... how ast is it ?

I´ve emailed davesmotors.com I hope they can help me out. The others don`t like Germans or don`t have stuff for GSR 25

I hope that I can close this X-file soon and work on my next...

Superjet 860 ccm

But thank you all for ya replys

B A T M A N

I'm running 22MPH(GPSed) with a unported cases(half the boost port is not even open:eek5 ona .710 spindle. About to port the cases and cylinder myself. It's more of a torquey setup which i like. Speed is only good when crusing

 

[choab]

check out www.gopednation.com

 

[gprider]

check out www.gopednation.com

I use to race in the Isa any else here use to race?
i have met meyer larry before.
For a gsr25 change the gearing. I cant tell you to what setup b/c i dont know if you live by hills or flat land etc. if you really want to make it faster get it ported. check out daves motors for some already ported heads by doug at esp. If you have a G230rc. find a lh crank they weigh less and rev faster. get a ada S1 pipe with a small tgn xport and proflow you will be fast with this setup also check out some of the copper gaskets on ebay. get a .20 i use to run custom .16 copper gaskets. here is my old go quad motor and gsr sport
Ts case reed ported by Garret peterson and a proline rattle snake pipe no stinger
i ran a gsr40 sprocket so the tire had to be Bran new for it to fit.

And here is my quad

me in front of jay at vegas worlds

 

[waxhead]

Here is my one
Its a 52cc
extra transfer ports cut in it
turned into a reed port engine
custom exhaust on it
The stupid thing is its touch and go as to if you will get a tank of fuel through it before it smashes the chain in half
You have to lean over the front to stop it power standing but then it just somkes the damn tyre