- Location
- Clearwater, FL
Well #.0 and I were trying to get my ebox out of my ski this afternoon to install my MSD Enhancer, but it was really coroded and would not budge.
At first we tried shooting it with some PB blaster and chiseling away at the corrosion, but that was taking forever.
Chris (#.0) then had the idea to bust out his 3200psi pressure washer and hit the stud/hole with a 0Deg nozzle.
Well 5 minutes later the pressure washer had eaten through the corrosion holding the ebox to the studs and the ebox popped right out.:Banane01: :arms: :woot:
Anyways I just thought I would share that with ya'll cuz I know this is a pretty common problem. :biggthumpup:
At first we tried shooting it with some PB blaster and chiseling away at the corrosion, but that was taking forever.
Chris (#.0) then had the idea to bust out his 3200psi pressure washer and hit the stud/hole with a 0Deg nozzle.
Well 5 minutes later the pressure washer had eaten through the corrosion holding the ebox to the studs and the ebox popped right out.:Banane01: :arms: :woot:
Anyways I just thought I would share that with ya'll cuz I know this is a pretty common problem. :biggthumpup:
