Help. Advent curve

[jonny waters]

Hey just got a t3 advent ignition. Anyone know what switches to have set where.
08 sxr 800

Wet pipe
185psi
Reeds
Stock carbs
Stock motor
Msd coils
Stock prop
Thank you

 

[OCD Solutions]

http://www.adventignitions.com/timingCurves2.php?engine=1



On the website, if you click on the curves, it will open up a new window and show you the actual timing settings for each curve.

Yours is the D5 curve set so it has SXI-13, 18, 19 and 20 programmed into it.

View attachment 304035

 

[OCD Solutions]

You can download the product info here;
http://www.adventignitions.com/dataSheets/SXR-c.pdf

Install guide here;
http://www.adventignitions.com/installGuides/All_SXR-install-g.pdf

User manual here;
http://www.adventignitions.com/userManual/SXR-user-b.pdf

 

[jonny waters]

All that stuff looks like Chinese to me. If it has 3 switch boards how am I suppose to read those 4 files ? So confusing

 

[jonny waters]

Just read everything but what is the last switch bar for and why are there 7 switches ?

 

[Jetfiend]

My SXR setup was almost identical. I ran the T3 with the D23 Curve set. I think I ran SXI-22 curve and it ripped!

 

[OCD Solutions]

Just read everything but what is the last switch bar for and why are there 7 switches ?

Switch A has 7 dipswitches. 1-5 are used to set the RPM limit, 6 and 7 are used to select one of the 4 pre-programmed curves.
Switch B has 6 dipswitches. 1-4 are used to set up the water injection channel 1 switch point. 5&6 set Ch2 switchpoint.
Switch C has 6 dipswitches and is used to set the RPM trigger range for the water injection.

 

[88kawi5fiddy]

and when it says 110 octane, it means it. or else.... KABOOOOOM

 

[teamcasslake]

For any one curios on the advent timing curve i made a spreedsheet on the stock curves