Blaster help asap! 61x with dual 44s and factory mod pipe carb specs needed!

[VCIFERNI]

Like the title says I have a Waveblaster 1with a 61x and it has dual 44mm carbs on it and I just bought a used factory mod pipe and need the jet specs for it. Tryna ride tomorrow so help please

 

[RnR-Negro]

turn the high speed in 3 turns, then out 4, then in 7, out 2, then finally in 1.5 turns. worked for me

 

[VCIFERNI]

Okay, I trust you

 

[Matt_E]

turn the high speed in 3 turns, then out 4, then in 7, out 2, then finally in 1.5 turns. worked for me

Seriously?

Depending on whether the OP has OEM 44's or retail 44's, the jetting will be different. The adjusters can fall out at three turns depending on which it is.

You will probably have to rejet the carbs (bigger main and pilot jets)
OP, check here: http://www.x-h2o.com/threads/19403-Carburetor-(specs)-Database-SuperJet-and-Blaster-1&

 

[tmc9046]

I am running 122 mains and 102.5 pilots on mine.

 

[rowand44]

I would rejet Dhy should have jets in stock. I have seen that black blaster before. You ride ocean city?