Super Jet help getting glue off

[stormd]

Ok so last night I decided to pull my graphics off the sn I just bought but the glue did not come off what would be good stuff to use so I can get all the glue off

 

[Sanoman]

acetone but test an area before you do a large area.lf it's oem paint.it should be fine.

 

[stormd]

Yea it is oem paint it still had the 1990 graphics on it. I am looking to paint them here before to long

 

[aramis]

Goof Off or Goo Gone...I used Goof Off and it didn't harm either the '93 or '98 paint or gelcoat.

While at the store, don't forget to get a can of elbow grease too...

You've got to wet it good, let it sit a bit to soften, run your fingernails through the glue (or a soft plastic putty blade) to get off the easy stuff, and repeat...don't just try to use a paper towel only to wipe it off, you'll be there for days.

 

[DrDink]

I have had the best luck using De-Solv-It Contractor's Solvent. Nice orange smell and not too hard on the ski.

 

[wispy]

gas, just put some on a rag, wipe it on the glue a bit and use a credit card to scrape it off. thats all i ever do, works great

 

[Armored snuffy]

X2 for the goof off

 

[OptimaRacing]

3M "Adhesive Remover" Black aerosol can with red 3M logo. Found at most auto parts stores. You may have to hit the leftover adhesive residue a few times to "loosen" it up, but wipe it off with a clean rag while it is still wet/loose.

Just another option.