help me spend a 1000.00

2

2nd nature

Location
atlanta ga
heres what i got 94 superjet square nose
new 61x cylinders stock bore
new oem pistons,rings ect
low hour crank
61x cases. motor is not put togther yet because i might port.

cyclone foot holds
170 psi girtle protec head
freestyle pump cone
nujet 14/17 prop
msd total loss
roundnose pole shortened 2 1/2 inches w/ petes bracket
umi 0 bars
umi trottle
factory b pipe
one way vale
stock d cut plate
front exhaust
slut hood mod
stock 44
in the process of refoaming and reinforcing

today i got and extra 1000.00 to spend what would be in my best intrest .

i need a better carb . should i sell the 61 x stuff for 62t i have or just port cylinder and have stock carb worked and trade the protec for an ada. should i sale the 61x cylinder and pistons and put a ported 760 and wf carb like yamaski did. or does any one have a good engine thats ready to ride for 1000- 1500 can you big bore a 61x?
 
jetskiking

jetskiking

Im done sanding!!!
Location
Dallas Georgia
Hey Mark, sounds like just enough for a watercraft factory top deck:biggrin: Send your jugs for freestyle porting. Get some 62t cases and oem 44s thats the direction I would head in.
 
RMBC Freeride

RMBC Freeride

Vintage
Site Supporter
Location
Pueblo, CO
I have never heard anybody having anything good to say about nujet props, except on a few sitdown models. If they were the best, or even highly recommended, you would hear it on this site, right? Nobody uses them. Talk to Impros or Magoos about it, I'm sure they have tested and have the technical reasons why they are not so hot.

Go ahead and try it, but hey... you asked where to spend your money & I made my suggestion...
 
S

sflsurfrider

ditch the head and get a girdled head

ditch the prop and get a concord

keep the 61x cylinder and have it ported

ditch the 61x case and go for a 62t

send your carb to WF for the 44 to 48 mod
 
MADMAT

MADMAT

Location
Ohio
Porting and a prop if that one really sucks. There is 600 bucks right there. While your at it have MaGoo (if thats who is doing your porting) bore your exit nozzle for 25 bucks and lighten your flywheel 55 for bucks.

For sure porting though!! It sounds like you already have a nice ski so porting is all you really need.
 
2

2nd nature

Location
atlanta ga
MADMAT said:
Porting and a prop if that one really sucks. There is 600 bucks right there. While your at it have MaGoo (if thats who is doing your porting) bore your exit nozzle for 25 bucks and lighten your flywheel 55 for bucks.

For sure porting though!! It sounds like you already have a nice ski so porting is all you really need.
Click to expand...

lighten flywheel ? im running total loss cant get any lighter.
 
S

sflsurfrider

MADMAT said:
bore your exit nozzle for 25 bucks
Click to expand...

ive tried running a wammer cone with a bored nozzle and noticed some cavitation. threw the stocker back on there and its golden!

wifey has wammer cone now w/ stock bore nozzle.

its as if 1 or the other is good but both is a no-no. thats my experience anyway.
 
MADMAT

MADMAT

Location
Ohio
Thanks for the info. I'm glad I had an extra one I just sent to MaGoo. If it cavitates then one has to go back to stock. Probably the exit nozzle.
 
You must log in or register to reply here.
Top Bottom