Help with SXR carb linkage.

[djkorn1]

Lets just say I left one of the aftermarket linkage couplers in the sun to dry on a table and then it was gone.. I think the :baby: swiped it and chucked it somewhere.

Help! Who has one layin around.. already contacted Jetworks and waiting to hear back.

 

[djkorn1]

bmp

 

[snowxr]

What's it look like?

 

[SUPERJET-113]

The main rubber coupler piece?

 

[djkorn1]

No, the aluminum one on the end of the carb. Looks like a kawi driveshaft coupler but smaller. Has two little holes in it for the set screws.

 

[#ZERO]

The Jet-Works linkage piece has external splines and the Mikuni kit uses internal splines that can be purchased separately; so you may have trouble finding those anywhere but Jet-Works.

 

[djkorn1]

Calling Jetworks in the morning.

 

[Shifty]

Here is a picture of the JetWorks Coupler.

 

[djkorn1]

whoa...mine doesn't look like that at all.

 

[SUPERJET-113]

whoa...mine doesn't look like that at all.

Mine either... I have BrapJack dual 44's and they used the old skool alum pieces like you mention with 2 set screws each with the straight rubber piece in the middle.
I really like the design of that one Shifty posted, looks much more bullet proof...

 

[BombThreat]

those are very nice, got a set on my BJ's

 

[djkorn1]

Mine either... I have BrapJack dual 44's and they used the old skool alum pieces like you mention with 2 set screws each with the straight rubber piece in the middle.
I really like the design of that one Shifty posted, looks much more bullet proof...

Yep, that's what I got.

 

[Matt_E]

Did you get a hold of him? Sometimes phone works better than email for him.

 

[djkorn1]

Yeah, he sent me the billet piece. Not the one I needed.

edit: Called him back and told him it was the wrong piece and then he sent me the rest of the kit, it doesn't fit at all. Spent about $60 already because of fast shipping and nothing fits.

Not sure what to do or how to get these carbs linked. ANYBODY know how to order a Mikuni carb linkage kit?

 

[SUPERTUNE]

If you have short carb spacing the Jetworks doesn't fit, need the Mikuni kit.
If you don't find anything local, call the shop and have Chad send you one as they are pretty common for any high performance jetski shop.
Chuck

 

[djkorn1]

The Jetworks is too big...might just shave it down tonight and make it work. Thanks Chuck.