How far from the back of my ski to mount my REVs?

[Waveblaster785]

I took all the turf off my RN tonight, and made a template for the REVs. Hard to tell from the ski on a stand how far back to put my revs. Anyone have any measurements? Maybe a measurement from the rear rail to the back of the foothold.

I'm only like 5'11, and with the ski flat, of course they feel better forward, but i don't want to hit the pipe too bad either.

Any help is appreciated.

 

[VegasRider]

Even with the foothold back as far as they can your probable still going to need to notch the foothold out and fiberglass over the pipe.

Me i would put them as far back as you can but that's me. Plus smaller hole to glass back in. Good luck

 

[tipafew]

Ummmm, I would have to vote for as far forward as possible. That way when you shorten your pole you are still good. Def. move forward!
You will have to cut the corner and re-glass because of the exhaust no matter what you do.
I want to say the front of my holds were about 12" from the front of the tray......Maybe a tick forward from that....

 

[weston]

check out my build
without turf in the tray from the front of the tray to the front of the toe area in the hold measures 11"

 

[yamaslut]

I got rid of the rear exhaust and made them huge.... it sucks to have to notch around them but they still work great that way...

 

[Crab]

I am 6' with -2 pole and short turnplate with straight bars.

 

[NJrider]

Thanks crab. That picture helps a lot! Have been gettin nervous not knowing how to cut my revs and that looks perfect. Thanks again man:biggthumpup: