Blaster I need more rise w/ accusteer

[motoman3000]

Whoever uses accusteer on their B1, does anyone sell something to make my bars taller?
I had to switch bars at end of last summer and they are lower than I like.
Or is my only option buying bars w/ extra rise? Just don't know what's out there

 

[Vumad]

Whoever uses accusteer on their B1, does anyone sell something to make my bars taller?
I had to switch bars at end of last summer and they are lower than I like.
Or is my only option buying bars w/ extra rise? Just don't know what's out there

They make bar risers for atvs. They just bolt onto the bars and raise the mount. I had an outlaw riser kit for my yfz450. Only $20. It has several little plates that let me adjust the rise from 1/2 to 2-1/2" give or take. Only down side is they move the bars back relative to the angle of the steering stem.

They also make ones that convert from 7/8" to 1-1/8" fat bars and provide the amount of rise of the adapter thickness. Also only $20.

My buddy had a very high end set for his blaster quad. It was a fixed height of about 3" but clamped on like handle bars. It allowed him to actual rotate it forward and back unlike the fixed rise of the plates. It also had built in dampners for vibration. It was about $100-120

 

[motoman3000]

So I'll look at a mx supplier, thx vumad. $20 is the perfect price

 

[Vumad]

So I'll look at a mx supplier, thx vumad. $20 is the perfect price

I think the adapter style are closer to $40, but I recall my outlaw risers that did not adapter bar sizes being very cheap. I picked them up off the shelf at he local dealer. Just be sure to swap for stainless hardware.

 

[mxridda02]

Vumad, Something like these? For adapters http://www.amazon.com/Outlaw-Racing...ue&ref_=ox_sc_sfl_title_14&smid=A9NJNMT9ZTSIP

 

[Fro Diesel]

@Vumad lol i purchased the same ones for my next blaster build, sub'd to find out if they work.

 

[Vumad]

Vumad, Something like these? For adapters http://www.amazon.com/Outlaw-Racing...ue&ref_=ox_sc_sfl_title_14&smid=A9NJNMT9ZTSIP

Make sure they are 7/8 on the bottom and that you have fat bars to go on the top. That wont rise stock bars and if the bottom is 1-1/8 it wont even fit. Check before you buy.

This is what i had on my yfz450. The yfz450 came stock with fat bars. I didnt look at the size on these.
http://www.amazon.com/Outlaw-Racing-Motorcycle-Adjustable-Universal/dp/B005SUVR90

 

[motoman3000]

Awesome boys, exactly what I was looking for. Amazon has effin everything

 

[Vumad]

Awesome boys, exactly what I was looking for. Amazon has effin everything

Two different styles were linked. Which ones did you choose?

This is the other style I was talking about that allowed rotation. They do make this style with dampners.

 

[motoman3000]

Two different styles were linked. Which ones did you choose?

The adjustable looks nice but not looking to spend that much $$ on risers. I'm liking the 2nd pair you posted- looks like they have different levels to chock- up height as you wish.
Need to find other items for free shipping b4 pulling the trigger

 

[Vumad]

The adjustable looks nice but not looking to spend that much $$ on risers. I'm liking the 2nd pair you posted- looks like they have different levels to chock- up height as you wish.
Need to find other items for free shipping b4 pulling the trigger

Go to the local bike shop. They stock them local because they are universal.

 

[motoman3000]

So I bought these for $30

But the hole spacing was too narrow by about 2-3 mm. Tried to ream holes but wasn't enough meat left to keep strength.
I'm trying these next

I'll report back

 

[Vumad]

So I bought these for $30

But the hole spacing was too narrow by about 2-3 mm. Tried to ream holes but wasn't enough meat left to keep strength.
I'm trying these next

I'll report back

Sorry to hear the risers didn't work out. I apologize if I wasted some of your money. They worked perfect on my YFZ450. I'm surprised that the bolt pattern isn't universal. I know guys told me they are using universal 7/8 to 1-1/8 adapters on B1s that are very similar to the outlaw adapter. I wonder if accusteer changed the bolt pattern or if the stock bolt pattern is different too.

 

[motoman3000]

No problem here V. I bought them. I've lost way more.
Confident the adjustables will work.

 

[motoman3000]

Installed these $80 billet risers

They bolt on easy. Only negative is its hard to get all 4 oem tight. Instructions say tighten all enough to move into position then crank down on the two accessible oem bolts. Nice height. I approve and so does my back.
Before

After

 

[fharrison]

Just noticed you have a Surf City sticker, do you ride out of LBI much motoman3000? My brother and I ride the surf @ Beach Haven Inlet.

 

[motoman3000]

Just noticed you have a Surf City sticker, do you ride out of LBI much motoman3000? My brother and I ride the surf @ Beach Haven Inlet.

Yep have place in surf city. We've used that inlet once to get to ocean down there. Mostly we ride in area by bridge but make occasional treks to beach haven to have a few @ sea shell