Super Jet impeller nose piece

Tyler Zane

Tyler Zane

Open Your Eyes
Location
Panama City Beach, FL
so i have been wondering if the billet ones are any better than the soft rubber ones. every time i get done with a ride i reach in in intake grate to find my nose cone half way up the drive shaft. it creates horrible cavitation and im tired of it.
 
Waternut

Waternut

Customizing addict
Location
Macon, GA
Sounds like you've got the wrong nose boot. If it's the right size, it'd be a PITA to get off the prop. I bought a prop that had a billet nose boot on it. Looks pretty but I've never ripped a rubber one.
 
Tyler Zane

Tyler Zane

Open Your Eyes
Location
Panama City Beach, FL
it didnt rip it just isnt very secure on the prop. it was a used one that came with the mag pump i bought. the prop i bought new for my superjet came with one that was way to loose on the shaft. the one im using now slides in and out of the prop pretty easy.
 
BruceSki

BruceSki

Formerly Motoman25
Location
Long Island
use a little crazy glue on the rubber one. Those billet ones will weld themselves to the stainless shaft in saltwater in no time.
 
JetManiac

JetManiac

Stoked
Site Supporter
Vendor Account
Location
orlando
Dont use 5200, made that mistake once. Hard to remove and you will need a new one after that.

Use silicone to seal to impeller and to the shaft, easy to remove and wont come off anymore.
 
Tyler Zane

Tyler Zane

Open Your Eyes
Location
Panama City Beach, FL
jetmaniac said:
Dont use 5200, made that mistake once. Hard to remove and you will need a new one after that.

Use silicone to seal to impeller and to the shaft, easy to remove and wont come off anymore.
Click to expand...

you use silicone with the nose piece, or just silicone?


i forgot to put mine on once and noticed a big difference on bottom end hook up when i put it back on.
 
Last edited:
You must log in or register to reply here.
Top Bottom