Impeller pitch for 155 OEM pump

[loictahiti]

Hi guys

I m building an XFS 16 fiber for my son, with the following specs
701 lightly ported, B pipe, 38 rejetted, head 180 psi, RRP light handlepole , OEM water box and 155 OEM pump , trust tilt.
For you , what is the best pitch for this setting ?
Thanks at all

 

[DylanS]

Hi guys

I m building an XFS 16 fiber for my son, with the following specs
701 lightly ported, B pipe, 38 rejetted, head 180 psi, RRP light handlepole , OEM water box and 155 OEM pump , trust tilt.
For you , what is the best pitch for this setting ?
Thanks at all

I’d say around 5/9-5/10. What bore is the reduction and steering nozzle ? Pump cone? Would probably say 5/9 is your best shot IMO.

 

[loictahiti]

Oups I have R&D pump cone reduction at 88,5 mm and steering at 91,5 mm

 

[DylanS]

Oups I have R&D pump cone reduction at 88,5 mm and steering at 91,5 mm

5/9, i have a feeling it might be a little much but you can always increase bore sizes and adjust pump cone etc..

 

[loictahiti]

Thanks DylanS

 

[loictahiti]

solas, skat trak ?

 

[fastgtfairlane]

a friend has the new V3 tigercraft with a jetmaniac 718, dual 38s, bpipe etc with an oem 155, bored outlet nozzle and hes running a 6/12 skat and it runs pretty solid. i believe its cutback 5mm as well.

 

[800750]

Skat 5/9 - 5/10