SXR Internal fuel fill??

[1Scray]

Anyone running the Blowsion dual pick up internal fuel fill? Is it worth it, does it have the basket filters at the bottom of the pick ups? If not do I need to run inline filters?

I am thinking about it for my stock SXR, I don't want to remove the external just allow me to get more gas into the tank.

 

[Texan33]

I am thinking about it for my stock SXR, I don't want to remove the external just allow me to get more gas into the tank.

IMO, it's not worth 170 bucks to have extra 1/4 gallon of gas in your tank if you are keeping the external.

 

[1Scray]

Yeah, i was thinking about the cost benefit too. For me it will work out.

 

[Texan33]

Don't do it dude...... Unless you will do the external fuel cap delete mod.

 

[LegDragger64]

I recently got tired of spilling gas into the lake and got a blowsion fuel filler . Cut the pickup tubes and spliced on the stock strainer/filters with fuel line . Will rework that with some seadoo type filters , same as cold fusion uses on theirs What I don't like about it is the filler opening that won't fit a 1 inch o.d. gas can spout because of the way it is made . Will have to break out the porting tool and grind it as well as look at thinning down the o.d. of the spout .

I sure wish cold fusion made one like I have on my superjet .

One big difference kawi to yami is , yami gas cap is male threaded into filler where kawi has female cap .

 

[djkorn1]

I made my own internal fuel fill out of the parts already on the tank...basically switched the fuel fill and the pick ups and heated up and bent the straws with a lighter...works fine, but I wish it was still on the outside...much easier than ripping my hood off all the time to fill up.

 

[Martin33]

The stock filler necks have been known to crack and leak water (mine did anyway), i have my blowsion fuel pickup and personally like it alot.

Daniel