Is there an easy way to tell what size pump I have.
- Thread starter WS6HUMMER
- Start date
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
Measure in inside diameter. Most likely a 144 or 148
Thank you I was afraid someone would say that, Is there a specific way to do that, can't see my harbor freight calipers fitting up in there lol.
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
pull the pump.
That is what I was afraid of hearing lol, thanks.
You could probably pull the intake grate and stick something in there to at least determine if it is 144 or 148. Doesn't take a super accurate measurement to make that distinction, you could cut a 144mm circle in a piece of cardboard, slit it and cut out the center, stick it in there and if it is about the size of the wear ring you have a 144, if it's about 4mm too small you have a 148.
How do I tell if the wear ring is stock? I've only ever had older Kawasaki's, yamaha is new to me.
As Kevbo said the stock wear ring is a stainless liner in an aluminum housing. Solas sells solid stainless wear rings (the whole housing is one piece stainless) in both 144 and 148 sizes, so if it is a one piece housing that doesn't really tell you anything.
OK, thank you both!!
That's a way better idea than what I suggested.
12 in. Locking Wing Divider
Amazing deals on this 12In Locking Wing Divider at Harbor Freight. Quality tools & low prices.www.harborfreight.com
View attachment 417362
- Location
- Western NY
possibly easier, also useful for other things:
www.harborfreight.com
Telescoping Gauge Set, 6 Piece
Amazing deals on this Telescoping Gauge Set 6Pc at Harbor Freight. Quality tools & low prices.
www.harborfreight.com