300/440/550 Js 550 mods?

[Buckley]

i have a all stock 1988 js550 i am looking to put a new exhaust and a new impeller into does anyone have any good recommendations

thanks

 

[b1m3x8]

For exhaust you could go with Factory Pipe, I have one on my ski. It can be found at http://www.factorypipe.com/p_kawasaki.php

 

[Joker]

are you looking for power or speed

 

[N2 H2O]

for power- factory half pipe, 15* skat-trak
for speed- pjs full pipe and manifold, 16* skat

 

[Buckley]

for power- factory half pipe, 15* skat-trak
for speed- pjs full pipe and manifold, 16* skat

Where can i find those
anywhere online?

 

[N2 H2O]

ebay and in the for sale section on here. You can also post up a want to buy add. Are you looking for power of speed?

 

[Buckley]

power

 

[N2 H2O]

Thats definitely the more fun route. With a factory half pipe and a 15* prop, you should have pretty good bottom end. You might want to also mill your head or look for an aftermarket one.

 

[Buckley]

thank you and i was thinking about getting this impellerhttp://impros.com/store/index.php/i...wasaki/solas-kb-sc-super-camber-impeller.html what do you think? and one more question I'm new with this so what does it mean by pitch

 

[N2 H2O]

That's a pretty good prop for your setup. It will have a little less low end and a little more top end than a 15* prop. It's desiged to have a good mix of top end and low end.

 

[Buckley]

one more question sorry if I'm bothering you but will this exhaust fit one a js550 cause it says 550sx i dnt think it shut be a problem http://www.factorypipe.com/p_kawasaki.php

 

[N2 H2O]

As long as you have the stock jetpower exhaust because the half pipes still use the first half of the stock setup.

 

[Buckley]

yup i have it thanks a lot

 

[rhugo21]

Hey Buckley, I have a nice coffmans half pipe and a jetpower exhaust let me know if you're interested

 

[cookn]

The coffmans is a better set up. I run the factory half pipe that doesn't have the mount and it wants to come apart sometimes. A new coupler solved the problem but it will most likely be temporary. The coffmans bolts right to the jetpower and doesn't use a coupler.

 

[rhugo21]

with the coffmans I know you need the special gasket for like 30 bucks, parker yamaha has them. But yes, I went with the coffmans originally because it doesn't require the rubber coupler, which tend to be chewed up and worn on most pipes

 

[N2 H2O]

i have a coffmans on mine and it seams pretty indestructible. My neighbor has a factory that he hasn't had any problems with, but he doesn't ride his ski very hard...

 

[Buckley]

is there anywhere i can get them new