kawasaski 1100 stand up

[Jordanhiggins2002]

did Kawasaki ever make an 1100 stand up. I know they made 2 1100 seadoos. and some people will swap the motors into their SXR hull.
how does this ski run for flat water fun. it's probably too heavy to do many tricks I was just curious your guys thoughts

 

[rhugo21]

Kawasaki never made one, people do the motor swaps themselves

 

[rhugo21]

But people use 1100 motors in their sxrs from other Kawi models with 1100's like the 1100 ZXI

 

[Big Kahuna]

The conversion is for race purposes or if you just like alot of cheap speed....... Not Freestyle Use..........

 

[Big Kahuna]

Seadoo never made a 1100

 

[StandupNation]

A guy in my area did the 1100 swap into his SXR. I got a chance to take it a few laps around the lake, and once that thing hit the pipe I felt like I was going to lose my arms lol.

 

[Jordanhiggins2002]

Bought one today In a 92 750 hull. Water box needed to be modified to fit. Engine looks huge inside the hull. Hoping for some arm ripping power.

 

[Jordanhiggins2002]

I would like to do some mods to give it some bottom end punch. Have not rode it yet though.
It does need a billige

 

[849tigerbotkv1]

Now you need to get a tubbies,hull extension and loooooong rider to be able to ride that thing without propoising

 

[Jordanhiggins2002]

Why does is porpoise?

 

[rhugo21]

Bc those hulls need a lot of work to handle well and take care of porpoising

 

[849tigerbotkv1]

^^* Or put more weight in the nose

 

[rhugo21]

^^* Or put more weight in the nose

Forgot that one, I knew a guy who use to put lead tape all inside the front of the hull to weigh it down, back when he raced his 750. Also had 1.5 inch hull extensions, extended ride plate, tubbies etc.

A 750 with none of these will for sure be one porpoisey ride from hell!!! But an arm ripper too

 

[Jordanhiggins2002]

I guess I will know on sat then

 

[rhugo21]

Post some pics of the ski bro!!! Let's see this bitchhhh

 

[849tigerbotkv1]

Forgot that one, I knew a guy who use to put lead tape all inside the front of the hull to weigh it down, back when he raced his 750. Also had 1.5 inch hull extensions, extended ride plate, tubbies etc.

A 750 with none of these will for sure be one porpoisey ride from hell!!! But an arm ripper too

I believe this is jeff jacob secret on his #1 that thing rides like a sxr with him riding it

 

[Half flip95]

will an 1100 fit in an sxi pro?

 

[Jetfiend]

will an 1100 fit in an sxi pro?

Yes, just give Harry at Group K a call, he has built a few of them.

I believe this is jeff jacob secret on his #1 that thing rides like a sxr with him riding it

Jeff Jacobs "secret" is his natural ability.

Jordan, don't go messing with that hull until you learn to ride it first. Get some time on it, so when you make changes you'll know if it was an improvement or not. With the added forward weight of the 1100, you should already have a pretty good ride.

 

[Jordanhiggins2002]

thanks for replies guys. I will post some pics and I will try to just ride the thing and see what happens. I have a 94 sx that doesn't have anything done except ride plate.

 

[N3vrSat1sfied]

IMO tubbies are a must for any 750 regardless of race or freestyle.