Super Jet large hub impeller recommendation...

[96superjet]

I recently purchased a new Solas 12 vane pump stator (with stubby cone) and realized that my old Solas YB-CD-13/17 impeller won't fit on the new Solas stator. So... I guess I'm in the market for a new large hub impeller.

Impros website states: "You will need a large hub design impeller such as the Impros Hooker impeller, the Solas Concord YQ-CD, or Skat-Trak C+75 Swirl impeller with this pump." My ski setup is as follows: JetManiac Big Bore 781 with dual 44mm mikuni carbs, Pro-tec intake, Factory B pipe with mod chamber, lightened flywheel, and MSD ignition enhancer, Solas 12 vane pump stator and stubby cone.

So... who's got impeller recommendations? BTW, do ya need to cut back any of these large hub impellers when installed with the Solas 12 vane pump stator?

 

[#ZERO]

I believe the most popular impeller for the Solas 144mm 12-vane pump is the Hooker 9/15 or 10/16. The hooker impellers are already cut back 7mm and if you purchase a regular Skat-Trak Swirl C+75 or the large hub Solas Concord YQ-CD you may want to have it cutback to get your pump load correct.

 

[BruceSki]

What he said^^

The c-75 skat 12/17 freeride prop is a great addition to the mag pump if you decide to run a skat prop instead of the hooker.