- Location
- Alabama
All Prices plus shipping and fees
HPE/Able 8mm Engine $2400 shipped- SOLD
8mm crank, 82mm bore. Engine might have 5 hours on it since build. ADR crank, cases done by DASA and uses their disaster plate, Wiseco pistons.
5 Hull Mounts $25
Bed Plates- SOLD
2016 Phantom- SOLD
Fiberglass hull in great shape. Includes ratcheting hood strap, pissers, 155 pump shoe. Turf isn't perfect, few places missing on the rail.
KVPI Throttle Lever- SOLD
Kart Tank- SOLD
Low use, has dual pickups, includes the check valve.
PHP Intake/VF3 Reeds $450- SOLD
Really low use
Battery Tray $20- SOLD
Midshaft- SOLD
Only has a couple hours on rebuild, splines are good.
RRP Pole- SOLD
Includes steering stop and cable holder.
RRP Pole Bracket- SOLD
Rickter style bracket powder coated, includes pole bolt, tubes, hardware.
RRP Chinpad- SOLD
One small chip pictured
Xscream Steering- SOLD
Includes bearing kit and bar clamps
RRP bars- SOLD
Has a ding. See picture. Will include the dirty ODI grips.
OEM RN Throttle Cable- SOLD
Blowsion HD Steering Cable- SOLD
Includes no slop ends, nut and bolt, and 2 steering extensions. Cable has a lot of use but still feels fine.
Engine Couch Mounts- SOLD
Includes hardware
JD +2 Intake Grate- SOLD
B Pipe- SOLD
Limited chamber, all screws turn, manifold has helicoils.
Xscream Waterbox- SOLD
46 Carbs/FAs- SOLD
Carbs are clean and ready to go with linkage and flame arrestor adapters. The Flame arrestors themselves are starting to come apart some.
Zeel/Flywheel/SS Switch- SOLD
Lightened charging flywheel, 2 curves available (can program curves for you if needed), includes a good working start stop switch since it has new connectors soldered in, also includes engine side grommet block off.
Able Billet Couplers- SOLD
Has some dings, includes dampener
Pump- SOLD
Couple hours on rebuild, custom cut shaft to run in any hull requiring superjet length driveshaft. Includes pump bolts and seal.
Impeller- SOLD
7/13 -5mm Skat
Trim- SOLD
Oem style trim with RRP cable, lever, cable seal, return spring, cable mount. Upsweep 89mm bored nozzle, 91.5mm steering. Nozzle is powder coated.
Ebox Mount and hardware- SOLD
Flow Control Valve- SOLD
HPE/Able 8mm Engine $2400 shipped- SOLD
8mm crank, 82mm bore. Engine might have 5 hours on it since build. ADR crank, cases done by DASA and uses their disaster plate, Wiseco pistons.
5 Hull Mounts $25
Bed Plates- SOLD
2016 Phantom- SOLD
Fiberglass hull in great shape. Includes ratcheting hood strap, pissers, 155 pump shoe. Turf isn't perfect, few places missing on the rail.
KVPI Throttle Lever- SOLD
Kart Tank- SOLD
Low use, has dual pickups, includes the check valve.
PHP Intake/VF3 Reeds $450- SOLD
Really low use
Battery Tray $20- SOLD
Midshaft- SOLD
Only has a couple hours on rebuild, splines are good.
RRP Pole- SOLD
Includes steering stop and cable holder.
RRP Pole Bracket- SOLD
Rickter style bracket powder coated, includes pole bolt, tubes, hardware.
RRP Chinpad- SOLD
One small chip pictured
Xscream Steering- SOLD
Includes bearing kit and bar clamps
RRP bars- SOLD
Has a ding. See picture. Will include the dirty ODI grips.
OEM RN Throttle Cable- SOLD
Blowsion HD Steering Cable- SOLD
Includes no slop ends, nut and bolt, and 2 steering extensions. Cable has a lot of use but still feels fine.
Engine Couch Mounts- SOLD
Includes hardware
JD +2 Intake Grate- SOLD
B Pipe- SOLD
Limited chamber, all screws turn, manifold has helicoils.
Xscream Waterbox- SOLD
46 Carbs/FAs- SOLD
Carbs are clean and ready to go with linkage and flame arrestor adapters. The Flame arrestors themselves are starting to come apart some.
Zeel/Flywheel/SS Switch- SOLD
Lightened charging flywheel, 2 curves available (can program curves for you if needed), includes a good working start stop switch since it has new connectors soldered in, also includes engine side grommet block off.
Able Billet Couplers- SOLD
Has some dings, includes dampener
Pump- SOLD
Couple hours on rebuild, custom cut shaft to run in any hull requiring superjet length driveshaft. Includes pump bolts and seal.
Impeller- SOLD
7/13 -5mm Skat
Trim- SOLD
Oem style trim with RRP cable, lever, cable seal, return spring, cable mount. Upsweep 89mm bored nozzle, 91.5mm steering. Nozzle is powder coated.
Ebox Mount and hardware- SOLD
Flow Control Valve- SOLD
Attachments
-
C143D65E-AAAF-485F-9707-5033F08C40BB.jpeg -
651B0E3A-15F2-44E7-880C-89FB81CFFA92.jpeg -
81A030FA-6949-4053-93A6-39BB2A67778A.jpeg -
CB394060-5CCA-4F21-B66B-D4F8A6754C15.jpeg -
30CE2D33-7854-4859-A4BA-5EF72FEB69D8.jpeg -
851949D6-768E-43A4-AA57-BB72ED19AD25.jpeg -
6BE1385E-0B52-4209-AD0B-9E470F6AACCB.jpeg -
79FBAB2E-E26C-4A82-A323-75BF77272742.jpeg -
F7F62BED-36A8-4012-8F7F-79B272BBE8F8.jpeg -
D67F1117-88D1-43D7-8766-5C8D7D68E3E2.jpeg
Last edited:
