- Location
- Cleveland OH
Thanks
The 750 Mod pipe is sweet. It doesn't load up at all in tail stands and saved me about 25 lbs in weight and lightened the nose a ton. It sounds like a 951 kawidoo race ski.
Lightweight Freeride SXR
- Thread starter TaterStick
- Start date
Thanks
The 750 Mod pipe is sweet. It doesn't load up at all in tail stands and saved me about 25 lbs in weight and lightened the nose a ton. It sounds like a 951 kawidoo race ski.
- Location
- Cleveland Ohio
Looks good bro! :headbang: Does it sound like the Texas chainsaw massacre with that pipe?
Last edited:
turnagainhardcore
X-H2O
- Location
- Alberta
looks good!!
Ericfox
Do it twice?That's DooDoo
- Location
- Akron area --> OHIO!
yes! Lol
CarFanatic
Fiberglassing Newb
- Location
- Cincinnati, OH
sweet when we all riding!
oldskoo
local jackass
- Location
- Cleveland Ohio
its not bad from land but when your riding it you need a helmit for hearing protection..................
oldskoo
local jackass
- Location
- Cleveland Ohio
I will say im a huge fan of it........the C.G will leave the rest of us alone now haha
- Location
- Cleveland OH
Think about how an 800cc dirt bike would sound. Thats it! Its kinda loud when you are riding it, but I was surprised how quiet it was from the shore. They had RC boats running at the lake that day and I could hear them over my ski about 200 yards away.
Cool.
i mocked up that chamber a few years ago but never ran it.
What prop/pump combo you running with it? you know what your taching?
Like seeing all these killer GREEN boats being built!
:bananalama:
stredman
stredman
Sharp ski. Very nice work all around!
- Location
- Cleveland OH
Im running a stock pump with a skat 8/16 swirl and an x-2 exit nozzle and stock pump cone. Im surprised how fast it still is on top. Still feels like its a 45+ MPH ski on the top. Im not sure what it tachs out at. Im running 80 pilots and 150 mains. I might try to run 75 pilots, I think its a tad rich on the bottom end. What did you run with your ski?
w-nut
x2 nut
- Location
- christchurch new zealand
i tryed a mod chamber in my new modle x2 scorn and was radared at 52.4 turning 7050 rpm with the standard pump and prop.
i still need to do some carb tuning and pipe tuneing to get some more out off it. 2 other friends have run that pipe set ups in there sxr,s and both were radred at 55-56 mph but i dont know what rpms they were turning tho sorry
- Location
- Cleveland OH
What jetting are you using? IM running 80 lows and 150 highs. I think its on the rich side down low though.
- Location
- Cleveland OH
OK so I don't think I like the 8/16 swirl. I had it out on lake erie in some surf and it cavatated like hell. It works great on flat water but sux for jumping waves. I changed it back to the stock impeller for now. I'll see how it runs this weekend.
Also ordered a TBM -1 turn plate, straight bars, and ODI grips.
Also ordered a TBM -1 turn plate, straight bars, and ODI grips.
N3vrSat1sfied
Military Member
- Location
- Fort Worth, TX
i love my 8/16 swirl on my 750 works great in the surf
- Location
- Cleveland OH
I think the x2 nozzle is too big to keep my pump loaded with that pitch. I bet it would be much better if i was running a smaller nozzle. I think the x2 nozzle is 83mm or 84mm.
N3vrSat1sfied
Military Member
- Location
- Fort Worth, TX
i am running a 81mm