Super Jet Limiting rope on xmetal pole

[Dmac80sc]

Anyone have pics of where they mounted their limiting rope on their xmetal pole. Up by the handle bars is what I am looking for. Also where at the bottom of the pole are you clipping on the bunge part of the rode?

Thanks

 

[Tmart]

I'm gonna loop mine through the 2 big holes of the xmetal turnplate in between the bar clamps

 

[zyxwvu44]

you could use some washers to put the mounting point in the adjustable slide area and go around the breather tube for the bungee to clip to itself

 

[Freakrider]

I used a 5/16 eye bolt with a washer on the adjustable pole in the middle adjusting bolt hole...Is this the adjustable pole ?

 

[hornedogg79]

I went to a climbing store and got a small sewn nylon webbing loop. I just run it through the adjustable slot part of the pole then back through itself then clip my limiting rope to that. That way I didn't have to drill a hole through a new pole.

 

[SuperJetGirl]

Anyone have pix or have ideas on where to hook up the limiting rope on an SJ 2013? It's a different setup then the older SJs, there is no bolt on the bottom of chin pad for the limiting rope to attach to... Any help would be great! Thx!

 

[IS0LD0UT]

I also ran a loop around the adjustable part of the pole.

 

[SuperJetGirl]

Adjustable part of the pole? I have a stock pole.

 

[hornedogg79]

Drill through and use an i bolt

 

[SuperJetGirl]

Ah i see. Ok so i gotta drill. Was hoping there was a way to not drill.

Awesome, thanks guys!!!