location of hose "T"

[billglass]

I relocated the T for the garden hose hookup to the cooling line from the pump for a cleaner install. I was just checking if there are any downsides to this before I reinstall the motor.. The only downside I see is that half the water will come out the pump.. Just checking. Thanks

 

[motoman3000]

Water finds easiest path. That might route it all out pump. If ur not using the stock flush tap a line going into head is what I've always done.


Sent from my iPhone using Tapatalk

 

[billglass]

Two things, 1) can I tap ones of the lines(dual cooling) in from the pump to run water injection? Or is that robbing the prime cold water to the manifold? 2) or do I have to have two T's one from head to the pipe. One for the hose and 1 for the water injection for the riva pipe. Right now I have 1 T off the head to the pipe to feed the water injection. In theory, the water injection will shut off above 5200 rpm so when the engine real needs all the cooling, it gets it. It's most important for me to do it right, I just hate all the clutter of water lines.

 

[motoman3000]

I can't comment on plumbing to any pipes cuz I never have had 1 but you can't rob water it'll find its way. I'll let others comment


Sent from my iPhone using Tapatalk