Looking aftermarket filter riser

[loictahiti]

Hi
As title says, I’m looking to rise my aftermarket filter because they hit the half girdle kit , i remember one compagny makes them in square and black …but whitch compagny …my memory leaves me
Thanks

 

[WFO Speedracer]

Is this what you are looking for ?

OEM style airboxes for 44/46 and aftermarket carbs

I've been working on this project for about 6 months now and feel like I've got something to offer the general public. What you're looking at is a clamp on and bolt on airbox bases that uses oem screens. The airbox top uses oem bolt spacing and has been redesigned to be lower profile and...

www.x-h2o.com

 

[loictahiti]

Is this what you are looking for ?

OEM style airboxes for 44/46 and aftermarket carbs

I've been working on this project for about 6 months now and feel like I've got something to offer the general public. What you're looking at is a clamp on and bolt on airbox bases that uses oem screens. The airbox top uses oem bolt spacing and has been redesigned to be lower profile and...

www.x-h2o.com

I have that all ready , but they hit the Group k half girdle , need a wedge to raise it higher (sorry my english is so bad ...)

 

[WFO Speedracer]

Well internet searching is my superpower so here you go , the ones in the first link damn expensive , so I included the second link for the budget friendly option , also my understanding is that you can use a reed spacer to get the clearance you need as well , I would guess that is dependent on where it is hitting at and that is in the third link.

XScream Risers with OEM Flame Arrestors (pair) - $250.00 : Team Xscream, The Worldwide Provider of Everything Freestyle & Freeride

Team Xscream XScream Risers with OEM Flame Arrestors (pair) - Complete kit with bolts and OEM flame arrestor pair to mount the flame arrestors over the head. *Note: These are sold as a set of 2 spacers with OEM flame arrestors.

www.teamxscream.com

Yamaha Superjet Waverunner 701 760 Flame Arrestor Air Box Riser NEW | eBay

Air box riser for Mikuni carburetor. This will raise the height of the box to clear the head.

www.ebay.com

Yamaha 701 760 Intake Reed Spacer R&D ADA TBM Blowsion Super Jet | eBay

NOTE: This only works on the 62T 701 cases and 760 cases. It will NOT work on the original downdraft style 61X 701 crankcase. Racing Yamaha 701/760 angled reed spacer kit.

www.ebay.com

 

[loictahiti]

Well internet searching is my superpower so here you go , the ones in the first link damn expensive , so I included the second link for the budget friendly option , also my understanding is that you can use a reed spacer to get the clearance you need as well , I would guess that is dependent on where it is hitting at and that is in the third link.

XScream Risers with OEM Flame Arrestors (pair) - $250.00 : Team Xscream, The Worldwide Provider of Everything Freestyle & Freeride

Team Xscream XScream Risers with OEM Flame Arrestors (pair) - Complete kit with bolts and OEM flame arrestor pair to mount the flame arrestors over the head. *Note: These are sold as a set of 2 spacers with OEM flame arrestors.

www.teamxscream.com

Yamaha Superjet Waverunner 701 760 Flame Arrestor Air Box Riser NEW | eBay

Air box riser for Mikuni carburetor. This will raise the height of the box to clear the head.

www.ebay.com

Yamaha 701 760 Intake Reed Spacer R&D ADA TBM Blowsion Super Jet | eBay

NOTE: This only works on the 62T 701 cases and 760 cases. It will NOT work on the original downdraft style 61X 701 crankcase. Racing Yamaha 701/760 angled reed spacer kit.

www.ebay.com

You are so nice, its exactly what im looking for , thanks a lot

 

[loictahiti]

as you say, the first one are little bit expensive ahahahahaha
second one are perfect but , just one in stock ;-((((
the third , dont want that ....

square riser are what i want and need thank you
now I know the exact name in english, can expend my search

 

[loictahiti]

I found that , in february 2012

 

[beerdart]

If you have access to a 3D printer I can send you a riser file for SBN 44

 

[loictahiti]

If you have access to a 3D printer I can send you a riser file for SBN 44

TOP , one friend of me wants to print them for me and he tells me ,needs the riser file.
do you need my mail adress to send it?

 

[beerdart]

Here is round 1" tall is that OK? Just change the .pdf to .step after download.

 

[loictahiti]

Here is round 1" tall is that OK? Just change the .pdf to .step after download.

Thanks
@joeschuit goes to make them for me .

Thanks to all for helping me .