Looking for a review for the TBM Superjet Flywheel

[Matt_E]

Why would you rather have a modded OEM than an enhancer? I have both and was planning on running a jetinetics/enhancer combo. I read that the curve was better on the enhancer but I have no experience with either one.

Because Enhancers are overpriced pieces of ********, with little to no performance difference vs stock and less reliability.

 

[Philip Clemmons]

I've had great warranty service from Greg at Advent. I had 2 box's fail for my sxr and both were replaced. I've also used it with a RAD wheel with no problems and again this is on a SXR.

I agree..................had a suspected failure, but it turned out to be plugs:frown: (you MUST run resistors with an advent).

Had another red labeled to me free of charge for the weekend, and even after finding out the issue was on my end, Greg just asked me to return it.

Awesome service and product! He (Greg) even gave me his cell and said to call if I had any issues over the weekend!

I have one on my sxr and sj and love them both!

Advent Rocks!

 

[Flat Brapp]

Because Enhancers are overpriced pieces of ********, with little to no performance difference vs stock and less reliability.

x2

 

[RoyalFlush@PCB]

Because Enhancers are overpriced pieces of ********, with little to no performance difference vs stock and less reliability.

:dunno:


http://www.x-h2o.com/threads/29666&highlight=MSD

 

[Matt_E]

That thread proves that stock CDI's have better reliability, even with messed up stators.
I'll take that over an MSD Enhancer any day, especially considering there is no performance benefit to be had with the MSD.

 

[RoyalFlush@PCB]

That thread proves that stock CDI's have better reliability, even with messed up stators.
I'll take that over an MSD Enhancer any day, especially considering there is no performance benefit to be had with the MSD.

Point taken about the reliability of stock vs. Enhancer.

I'm still going to question the performance benefit of stock vs. Enhancer. I think you gain performance over stock.

Advents ROCK!!! (When they work...:aargh4

 

[Matt_E]

I will admit that there is some performance gain.
However, much of that comes from the rev limit adjustability. (Which a modded CDI has, too)
The curve itself - meh, I don't think it's worth more than 50 bucks.

Admittedly, I am not very good at noticing small power increases (seat of the pants feel). I did not notice any difference back to back.

 

[sjaholic]

works with 61x or 62t. i'm interested in one also. i'd be running it with an enhancer. a free enhancer.

 

[cambo au]

matt
i bought one of the first ones at havasu it worked awsome i would recomend one to anyone it made my ski!
but if i where putting one on i would install a new oem bendix with it i blew a bendix and stuffed the flywheel completely i have since purchased another so that should teel you what i think of them

 

[Officer Mike]

is there an update on this? anyone who has one having anything to say on the actual performance gain?

 

[Ericfox]

I have it... it is working great.... added too much stuff though to tell you the exact difference... my ski does have great bottom end... I have no regrets...