Looking for a trick

[Parkersxr]

How do I remove this piece ? I broke a Kawi box fitting and can't get it out really don't want to cut the wires .

@ocdsolutions do You do Kawasaki stuff ?

Sent from my iPhone using Tapatalk

 

[Parkersxr]

Another thing anyone know the damn size of the thru hull fitting for the steer info cable at the pump side on a Eme hull . I tried to order s damn oem one but yeah it was way off


Sent from my iPhone using Tapatalk

 

[Harbor]

You might try slotting the broken face each side @180 deg, spread the wires, some each side of the slot and use a screw driver to start turning out the broken peice like a screw, little at a time

 

[Parkersxr]

You might try slotting the broken face each side @180 deg, spread the wires, some each side of the slot and use a screw driver to start turning out the broken peice like a screw, little at a time

I'm gonna give it hell in the am

 

[Kohldanielzimmer]

You can remove the wires from the plug by bending the connector pins flush. Then you can pull the wires through the grommet. A little silicone spray makes the wires slide through the grommet without much resistance. Once the wires are removed it should be easy to get out.

 

[superjetguy]

Are you trying to save the black part? Smack that beyatch with a hammer. Or if you want to be a little more civilized use a dremel with a cutoff disk

 

[Parkersxr]

Are you trying to save the black part? Smack that beyatch with a hammer. Or if you want to be a little more civilized use a dremel with a cutoff disk

I was trying to save the black part . But my patience gave way figured screw it and ordered the black piece thus smashing that sheet with a hammer lol

 

[superjetguy]

Yess!! Someone makes metal ones I think? Idk

 

[Jake Borgra]

Another thing anyone know the damn size of the thru hull fitting for the steer info cable at the pump side on a Eme hull . I tried to order s damn oem one but yeah it was way off


Sent from my iPhone using Tapatalk

Here is the number on the website, maybe try giving a call and ask. Hope it helps.

 

[Parkersxr]

Yess!! Someone makes metal ones I think? Idk

Yes some guy off of here did I google searched the x . Found his eBay site but he no longer puts them on there .

 

[Parkersxr]

Here is the number on the website, maybe try giving a call and ask. Hope it helps.

I'm not even gonna get into the Eric deal , but I managed to find one