Looking for pics of split RN waterbox

[LBE]

I'm running a RN waterbox in a B1 and wanted to see a pic of the waterbox split open. I would like to see how the baffle system is set up. I will be running the exhaust through it the opposite direction and mounted at a funny angle.

Any pics of split RN box would be appreciated.

 

[SuperJETT]

I've posted a better drawing before but can't find it.

inlet goes in and curves toward bottom
the baffle plate in the middle has a small hole or two at the bottom to let water go through, with 2 tubes at the top that extend into the inlet chamber
the exit is straight and goes to the bottom

I might be backwards on which way the 2 small tubes point, but you get the idea.

 

[LBE]

Thanks, I figured it would be something like that.

I would still like a real pic though. Because of the way it will be mounted, I don't want the water to choke it. I may try to figure out how to mount it "normal".

 

[Flash-FX]

Pix like these?

 

[LBE]

Great pics, thanks!!

 

[SX-R 800 Ripper]

Do I need to run the 2 small tubes in the waterbox? They fell out of mine
What would be the difference?

 

[mleontiy]

are there ways to hollow or modify the stock water box and get a little more sound out of it

 

[mleontiy]

anything?

 

[kevbo]

are there ways to hollow or modify the stock water box and get a little more sound out of it

You want to make it louder?

 

[orangefinger]

louder=faster ;0) .......not

 

[mleontiy]

well i doubt that modifying it will give more performance but a different tune would help compared to stock

 

[BruceSki]

Yes, I set my waterbox to a c sharp instead of a g flat.

Much better tune!

 

[mthomps]

Nothing says newbie like a group of riders that don't tune to the right scale.