I talking about the very bottom, make the edge sharp. The rear bondline/tray will always be out of the water once the nose breaks over. If you intend to ride fast make sure the rear edge of the rideplate is the lowest part of the hull.
Super Jet Might as well post up the history of my P.O.S.
- Thread starter Scottmac
- Start date
I talking about the very bottom, make the edge sharp. The rear bondline/tray will always be out of the water once the nose breaks over. If you intend to ride fast make sure the rear edge of the rideplate is the lowest part of the hull.
Noted! I planned on leaving extra on the plate so if I want to trim it later.
Panel bonded everything up and shoved a ton of pink stuff in.
Dropped the holds as low as possible without getting crazy.
Time to wrap up this hull now!
Forgot I had all these mixers, they might be used on the next hull I build.
Panel bonded everything up and shoved a ton of pink stuff in.
Dropped the holds as low as possible without getting crazy.
Time to wrap up this hull now!
Forgot I had all these mixers, they might be used on the next hull I build.
Last edited:
iangdesign
Cats, lots of cats!
- Location
- United States
You can never have to many gifs...especially Iron Man!
Ya think the 3rd movie will finally have the proton cannon in it?!
I saw that pump painted up and Iron Man was the first thing I thought of! Keep up the sweet build!
Ya think the 3rd movie will finally have the proton cannon in it?!
I saw that pump painted up and Iron Man was the first thing I thought of! Keep up the sweet build!
The latest update maxed it out and copied all my pics 10 times over and mixed them up. When I try to clean it up photobucket locks up.
Not going to lie, super pumped for the movie!
BrightE's
Paul
- Location
- Seattle, WA
This thing is looking great. I like the theme.
When you finished up the exhaust pipe, did you just hold it in with epoxy at the rear of the hull, or some fancy fabricating method?
When you finished up the exhaust pipe, did you just hold it in with epoxy at the rear of the hull, or some fancy fabricating method?
swapmeet
Brotastic
- Location
- Arlington TX
Looks really good Scat. Whats up with the firewall thing in the front of your tray?
iangdesign
Cats, lots of cats!
- Location
- United States
It's looking a little like a 300sx or a gen 1, but very cool! Love the lines!
Just epoxied the crap out my exhaust. The front firewall is going to be storage/fire extinguisher holder, it is also a front hold. Been playing around with different stuff too with the finishing. Using several different types of epoxies and going to see how it holds up over a season.
Last edited:
It's going to leak water into the rear.
Well I didn't get to the point of being ready for prime due to
Yep, double hospital visit! LOL, all is well after stitches and the doc got Carrie feeling better with meds.
but I got close
Just need finish sanding
Right side is pretty much ready ready for prime.
Left side needs a little more work before prime
Yep, double hospital visit! LOL, all is well after stitches and the doc got Carrie feeling better with meds.
but I got close
Just need finish sanding
Right side is pretty much ready ready for prime.
Left side needs a little more work before prime
swapmeet
Brotastic
- Location
- Arlington TX
Dude that thing is so wild looking. I hope you paint it right (I know you will... i'm just saying)
You're once ugly SN is gonna be famous...
Ok, I'll say it... All those 'creases' look like periforations so your ski knows where to break LMAO...
JK buddy keep it up.. FINISH IT!
*edit*
Why not put a Front foot hold in your fire ext spot? Do you ride surf stance or 2 back?
You're once ugly SN is gonna be famous...
Ok, I'll say it... All those 'creases' look like periforations so your ski knows where to break LMAO...
JK buddy keep it up.. FINISH IT!
*edit*
Why not put a Front foot hold in your fire ext spot? Do you ride surf stance or 2 back?
Last edited:
