Super Jet Mod chamber to NYNJA C-4: re-jet?

[tor*p*do]

Picked up a C-4 chamber over the holidays :hail:
and plan to install on my ported 718 cc motor.
Would it use the same jetting or do I need to richen it up?
Currently running a 46 mik commercial
120 lo/150 hi, 2.5 n&s
Thanks!

 

[egbrig]

I was involved with the first test of the ninja pipe. The ninja was installed directly inplace of a waveblaster bpipe with duel 48's, no jetting changes made and it ran great. To make the power that the pipe is capable, the water routing and pipe temp are critical. If anyone says different they don't know the pipe.

 

[RMBC Freeride]

I agree, start with your current jetting and it should be a good starting point, if not perfect.

 

[DAG]

To make the power that the pipe is capable, the water routing and pipe temp are critical. If anyone says different they don't know the pipe.

Since you know the pipe what are the #'s?

 

[madness maker]

i am running the jetting that was setup on my mod chamber, seems to work good, im sure there may be some room for gains with more tuning.. from what im told, the pipe need to get up to temp to work best, im running same water screw settings as i ran with the mod chamber, im prob still running it too cool.

 

[jo5hi3]

would love more info on this chamber