Moto360's 2000 RN SJ First Build

[Moto360]

Hey eveyone!
Well started this over the winter. Bought the ski in Oct. 07, went to Daytona in January and now hooked. I have riden a old school 650sx for years and have finally upgraded. Have been a motocrosser and still am, but that has been were my foces has been. Need a change. Anyway. Started with a 2000 RN SJ with
Protec Mach II with water injection
Protec Full gridle head
Vilder
Protec Trim
Solas Prop( I think a 13/18)
R and D ride plate
R and D pump stuffer and Top loader
Carbon hull extentions
R and D turn plate w/ Fly bars
KVPI throttle
Bilge pump and bracket
-2 Stock pole
and full AP Designs with lifters
Now I am getting carried away and I will fill you in. Here it is when I started.

 

[Scorn800]

Looks great!
I like the snow on your sled too!
Only 6 more months to go

 

[Moto360]

Ok here are some more pictures, footholds. I like the REV footholds because your foot is pointed forward and not out. More comfortable. But the ankle area might be alittle sharp. Never rode on REVs.

 

[Kwaka]

Looking good. Good luck with the build! What else are you doing?

 

[Moto360]

Here are more pictures. 2 are the foaming of the bond line before reinforcing. Sorry I don't have any more of the reinforcing. I'll have to take some more. Also included are some pictures of the hole drilled in the bulkhead for the supper valve. I went with the Monster 3" XFT straight from Brazil. I'll keep up dating.

 

[Moto360]

Looking good. Good luck with the build! What else are you doing?

Hey thanks a lot.


Moto360

 

[Crab]

Ok here are some more pictures, footholds. I like the REV footholds because your foot is pointed forward and not out. More comfortable. But the ankle area might be alittle sharp. Never rode on REVs.

View attachment 57340

View attachment 57341

View attachment 57342

View attachment 57344

View attachment 57345

Ankle area is sharp, check out what I did in my build thread.

 

[mxsuperfly124]

you should paint your ski yellow and make it like a old school yamaha. haha

 

[Moto360]

OK so it has been a little while since I shown more pictures. I was tring to wait to the end to show you the painted product but I had to get it painted before I installed the scupper and exhaust tube. I didn't want to try and tape off that stuff. I had to get all the screw holes filled from the hull extenders and the gel fixed because 5200 takes that off after it has dried. The hull extenders had to be chiseled off. WOW. So here is a shot right after I brought it home. You can see the Carbon reinforcing in these pictures. I did one layer of 17 oz biaxal and one layer of 6 oz Carbon fiber. Now I was able to get to work.

 

[Moto360]

Here are some more.

 

[mxsuperfly124]

looking good:bananalama:

 

[MADMAT]

looking good:bananalama:

x2!

 

[CnortSj7]

That Yellow though!!

 

[Mdavies_02]

That Yellow though!!

How did you get here lol? Its been 9 years since a post on this thread.

Welcome to the X

Mike

 

[CnortSj7]

How did you get here lol? Its been 9 years since a post on this thread.

Welcome to the X

Mike

Just joined the X. Friends with Pat and trying to hit my 5 Posts lol.