Other motor mounts..

[chadman154]

I would recommend the Rhaas mounts, i had an original set with tons of failed flips and crazy landing. Almost tore out at about 200 gallons on a 4 mil stroker. He warrantied them to the new billet ones, couldn't be happier

 

[Daloski]

RHASS all the way mate, 701 mounts have absolutely no place im the market....


Sent from my iPad using Tapatalk

 

[WILKEY]

Never had experience with rhass mounts. But I have heard good things. I'll stick with cold fusion till they let me down.

 

[tightithrash]

 

[tightithrash]

Oops forgot to add I'm biased so don't listen to me.

 

[ChadGnarly]

Thats a sweet vid, there should be 1 of those for every mount.

 

[MADMAT]

And I would like to see a rapid jerk test simulating a 85lb motor being slammed upside down hard!

But based on that vid those can handle anything I bet!

 

[Sparkplug]

Rhaas mounts. If not just for the fact if anythng ever does go wrong, Robin will take care of you. He shipped mounts back and forth with me until we got the right ones to fit my chan after I reinforced the bottom and it added thickness. The quality of the mount seems great, and mine are the 3/8 shorter.

 

[Daloski]

Cold Fusion or Rhass are the only mounts that have been proven for the Blaster market and this should be the benchmark for all manufacturers claiming to be 'Mount' manufacturers.
At the end of the day yes under extreme circumstances mounts will and do fail.
Ultimately the inconvenience caused by having to replace them and any damaged parts can be avoided during normal riding conditions by using the company's I have mentioned above, however if pulling your engine after every ride to replace mounts and broken parts is your thing, simply run the 701 mounts and you will be doing exactly this!


Sent from my iPhone using Tapatalk