- Location
- atlanta
Theres a ton of bar options out there for mountain bikes. Anybody tried running them on their ski?
Mountain bike riser bars?
- Thread starter yamahaulass
- Start date
- Location
- Charlotte, NC
Big Kahuna
Administrator
- Location
- Tuscaloosa, AL
Personally, unless they were heavy duty downhill bars I would be weary of them. Why not Pwc riser bars.
- Location
- Long Island
A lot of mtb bars are 31.8mm as opposed to 1-1/4 like jetski or motocross bars. I only used them on a fixed steer superjet with a umi steering for a short time. On a regular pole ski its goofy having backsweep, but to each their own.
Sent from my SM-G950U using Tapatalk
Sent from my SM-G950U using Tapatalk
- Location
- Boston, MA
1-1/4" = 31.75mm. Did you mean 7/8"?
- Location
- Long Island
No. Many people mill the 7/8 clamp off the bottom half of the UMI and stick 1-1/4 dirt bike clamp adapters on.
7/8 bars are a liability if you're riding anything but a stock ski.
Sent from my SM-G950U using Tapatalk
- Location
- the jetski grave yard
the WDK steerings use the 31.8 and I do have one of those on my flatwater ski. the bars were tweaked so I did get some for $20 on sale at the bike shop. they have a bit of back sweep instead of totally straight , which is what I wanted. they have held up great. most of the other systems use a smaller diameter bar. the bike shops do have a smaller diameter bar too, if I remember right. I don't care for riser bars
- Location
- Saskatchewan
ATP risers are where it's at If you e got normal size steering clamps. Solid alum risers. Last bars you'll buy
