Super Jet MSD total loss help

[XJCrawler]

I'm putting together my total loss right now, but I'm not to sure if I'm suppose to crimp or solder this type of connection

 

[Brian_216]

I got mine used, and they are all crimped inside. I took it all apart to re wire the birds nest that it was.

 

[motoman96]

You supposed to use a special tool for crimping those types of connectors. Just take your time an be careful an needle nose work.

 

[Watty]

Solder those ones. Tin the wire push it in there and heat up the outside until the solder melts and bonds the two together. The other way to do it is to put 3 or so small pits of solder in the end of the connector, heat it up until it melts and push the wire in. Those connectors are made specifically for soldering so you don't have to go out and buy the special crimp tool.