Mukuni carb tune screws

[shank]

Anyone got any links to articles or video on how to tune the low and high screws on a dual carb mukuni setup.

I rebuilt carbs and pulled out the screws to clean and now need to tune it but never done it before on this setup.

I got new needle and seat and correct popoff pressure has been tested and correct. So just the screws i believe to tune left. I rebuilt engine so it all brand new there.

 

[Sanoman]

Keep reading on here.Plenty of threads on this subject

 

[Mike W]

Common settings to start at are 1 turn out from closed on the low and 1 1/2 turn out from closed on the high.

Also, read the manual. It explains how a carb works so you can understand how to tune them.

http://www.mikuni.com/pdf/sbn_manual.pdf

 

[motoman3000]

Read the tech section on here, good info there

 

[shank]

Thanks i seem to have a baseline. Just following the manual. Gotta do some water testing now and check the plugs. So gotta learn plug reading next.