- Location
- Muskegon Michigan
My 91 440 build
- Thread starter oldschool440
- Start date
- Location
- Muskegon Michigan
- Location
- Muskegon Michigan
The boat is Kawi green and i got the graphics from pwcgraphics.com.
The motor is a stock 440 with
coffman pipe and exhaust manifold
westcoast high velocity stack with rejetted carb with primer
Jet tyme bored nozzle
skat 15.5 prop
westcoast ride plate and intake
umi handle bars with trigger throttle
blowsion billet gas cap
hydro turf mats
odi grips.
I had a lot of fun building this boat now i am going to put a 550 top end exhasut and 44 sbn carb with ported cylinders this winter. It should be alot of fun to ride.
It is now.
C-Ya
The motor is a stock 440 with
coffman pipe and exhaust manifold
westcoast high velocity stack with rejetted carb with primer
Jet tyme bored nozzle
skat 15.5 prop
westcoast ride plate and intake
umi handle bars with trigger throttle
blowsion billet gas cap
hydro turf mats
odi grips.
I had a lot of fun building this boat now i am going to put a 550 top end exhasut and 44 sbn carb with ported cylinders this winter. It should be alot of fun to ride.
It is now.
C-Ya
Attachments
Last edited:
DannyF
...
- Location
- miami,florida
what paint did you use to paint the ski and all the engine parts???
the engine compartment looks sick by the way
the engine compartment looks sick by the way
- Location
- Muskegon Michigan
I used dupli color Grabber Green for the engine parts-Auto Zone spray can
the paint for the ski is PPG Concept Acrylic urethane that i bought at Finish Master.
They said i would not need a clear coat for the paint it's pretty shiny it looks good i have had alot of compliments when i have been out at the beach.
When i do up the 550 motor it will be powder coated i don't know what color yet probably green.
the paint for the ski is PPG Concept Acrylic urethane that i bought at Finish Master.
They said i would not need a clear coat for the paint it's pretty shiny it looks good i have had alot of compliments when i have been out at the beach.
When i do up the 550 motor it will be powder coated i don't know what color yet probably green.